Dual Grit Diamond Flat Lap 150mm - 320/600

Dual Grit Diamond Flat Laps

320/600 Grits

These laps allow you to preform and cut your mains on the same lap. It is a time saving feature that saves you from changing laps between these two stages of faceting.

Preforming can be completed on the coarser 320 Grit, before moving to the finer inside 600 Grit where you can cut all your larger facets.

Smaller facets can completed on your pre-polish lap.

The laps are designed to fit all faceting machines. They have a 1/2" (12.70mm) centre hole and are approximately 1mm thick. They are designed to be used with a master lap.