Foredom K.2220-2 Jewellers Kit - H.20 Handpiece

Foredom K.2220-2 Jewellers Kit - H.20 Quick Change Handpiece

PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories.

They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.

Motor and Speed Control carry a 2-Year Warranty. Using a hammer handpiece with this unit will void the warranty. Hammer handpieces must be run below 5,000 rpm.

Components (same as the K.2230-2, except for handpiece):

1. Series SR Motor: 230 Volt version of Foredom's most popular and best motor for general use. The 1/6 HP, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shafting for connecting to any of Foredoms interchangeable handpieces.

2. C.FCH-2 Speed Control: Foredom's popular foot operated speed control. It has solid state electronics and comes in a heavy duty plastic housing with an extra wide design.

3. H.20 Handpiece: This "quick change" handpiece is for exclusive use with 3/32" shank accessories and is popular among jewelers who work with that shank size and make frequent bur changes.Features a molded plastic front grip with tapered sides for easy and close handling. It has pre-lubricated ball bearings that do not require lubrication. The H.20 is a member of the Foredom system of interchangeable handpieces.

4. AK11 Accessory Kit (see complete product listing below):

43-pc. assortment of professional jewelers/metal working accessories includes

Scotch-Brite EXL Wheels,

W Polishing Wheels,

Platinum White Compound,

Rubber Bonded Abrasive Wheels,

Jewelers Burs,

Ceramic Purple Sanding Bands,

Felt and Cotton Buffs,

Mounted Brushes, Mandrels,

Engraving Burs,

V Stone Wheel and more.

5. Flexible shaft grease Accessory Kit AK11 consists of the following (we reserve the right to substitute comparable accessories when needed):

A-10081 1 Rotating Bur Holder 3/32" w/cup A-40061 1 Platinum White,

1" Tube A-4516

6 Radial Bristle Disc, 3/4" dia., Pink, Pumice (1,200 Grit),

Pack of 6 A-4912 3 Purple Ceramic Sanding Bands, 1/4" x 1/2", 60 grit

A-4913 3 Purple Ceramic Sanding Bands, 1/4" x 1/2", 80 grit

A-4914 3 Purple Ceramic Sanding Bands, 1/4" x 1/2", 120 grit

A-4916 3 Purple Ceramic Sanding Bands, 1/4" x 1/2", 220 grit

A-5517 1 Satin Finish Scotch-Brite, Red, Fine, 7/8" dia. x 1/4" thick, Mounted with 3/32" Shank

A-5524 1 Satin Finish Scotch-Brite, Tan, Coarse, 7/8" dia. x 1/4" thick, Mounted with 3/32" Shank

A-A1C 1 Rubber Bonded Abrasive, Brown, Wheel, 7/8" dia. x 1/8" thick with 1/16" Arbor Hole, Coarse, 40-60 Grit

A-A1M 1 Rubber Bonded Abrasive Wheel, 7/8" x 1/8", 120 grit (black)

A-A1F 1 Rubber Bonded Abrasive Wheel, 7/8" x 1/8", 180 grit (green)

A-CW556 1 CW Polishing Wheel, Orange, 7/8" x 1/8", 500 grit,

A-CW557 1 CW Polishing Wheel, Gray, 7/8" x 1/8", 1000 grit,

A-CW558 1 CW Polishing Wheel, White, 7/8" x 1/8", 1500 grit,

A-D2 1 CUT-OFF DISC, 1-1/4" Fiberglass A-FB4-I 1 FELT BUFF, Unmounted 5/8" A-M1 1 Mandrel, 3/32" shank & 1/16" arbor hole

A-M13 1 Mandrel, LGE HD. 3/32 X 1/16 A-MB1 1 Mounted Brush, Cup, Bristle, 3/32" shank

A-MB2 1 Mounted Brush, Wheel, Bristle Stiff, 3/32" shank

A-MB3 1 Mounted Brush, End, Bristle, 3/32" shank

A-MB4 1 Mounted Brush, End, Brass, 3/32" shank

A-MB6 1 Mounted Brush, Wheel, Brass, 3/32" shank

A-P3 1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank

A-P7 1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank

A-R2 1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank

A-R7 1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank

A-SD324 1 Rubber Sanding Drum Mandrel, 1/4" x 1/2", 3/32" shank

A-V357 1 V Stone Point, Cylinder, 1/4" dia. x 1/2" long with 3/32" shank, 80 Grit