No Hole Diamond Lap 300mm(12 inch) 220 Grit

300MM DIAMOND DISK - NO CENTRE HOLE

300mm x 1.50mm  (12" x 0.05")

This product consists of a circular steel disc that is plated with diamond grit on one side.

Approximately 1.5 mm thick for use with a master lap.

These no hole disks offer a full face, flat grinding surface without the usual centre hole obstruction. This enables you to grind larger stones without the risk of damaging the face of the stone on the centre nut

The disk can be mounted horizontally or vertically. And can be attached using disk adhesive, contact glue, or by a magnetic backing. We do not recommend using a magnetic backing for high speed grinding!

These are fast cutting, heavy duty diamond discs and are ideal for all types of gemstones grinding, faceting or cabbing.

These products must be used with water. They are available in 100 mesh through 3000 mesh. The price is the same regardless of the grit size.

Excellent quality, commercial grade, long life and fast cutting.

Care Of Steel Diamond Plated Products
At the end of each working day stack any laps vertically to dry (a dish draining rack is good for this).
Care should be taken to dry any steel diamond plated disks and steel backing plates. A light spray of Inox or WD40 between uses will help prevent surface rust forming. Do not use chemicals such as rust converters on the plated disks as the chemicals may destroy the plating and cause even greater rusting.