ProCabber Variable Speed 150mm x 6 Wheel Stainless Steel Cabbing Machine

PROCABBER VARIABLE SPEED MACHINE

The variable speed machine runs from 1-1800 RPM at the twist of a dial. This is perfect for someone who may be grinding and polishing precious or soft stones. Also beneficial for cutters working across a broad range of materials. The variable speed unit is also our quietest machine making it ideal for reducing sound in shared workspaces or home studios etc.  

Our ProCabber cabbing machines are Australian made in Ballina NSW. They are fully stainless steel in construction including the shaft and bearings! 

ProCabbers have a longer shaft than less expensive imported machines, enabling greater spacing between the wheels. This allows much better access to the edge of the cabbing wheels.

Shafts are 1" stainless steel and threaded at both ends. The shaft reduces to 5/8" on both ends to accept left or right hand alloy face plates with a 5/8" UNF thread. Our shafts are also tapped out with a 1/4" thread on both ends to accept a range of accessories and plastic face plates that come with a 1/4" male thread.
The shafts accept silicon carbide, diamond wheels or rubber expandable drums of any brand.

CABBING MACHINE COMES WITH: 

Stainless steel body Machine, with shaft, shaft nuts and four wheel spacers.

A 1/2hp fully sealed Australian supplied motor that is C-Tick approved. A variable speed dial unit.

Water supply kit (6 taps and water manifold). The manifold screws on to a standard garden hose with the male fitting supplied.

Two (hard) Diamond plated wheels, standard set up and general purpose grits are #100 #220
along with four Diamond Pacific Nova (soft) wheels #280 #600 #1200 #3000.

We recommend three hard and three soft wheels as a better configuration for Lighting Ridge and Coober Pedy opal cutting. Our team is happy to give you advice on the best configuration to meet your particular requirements

A left hand Alloy face plate with #320 diamond disk for grinding flats. The face plate has been mounted with a magnet so any aditional grinding disc can be easily interchanged.

A right hand alloy face with magnetic backed felt for polishing. The face plate thas been mounted with a anti tarnish steel disk so aditional magentic felts can be easily interchanged. 

Choice of either Cerium Oxide or 50,000 Diamond Polishing Compound. We recommed 50,000 diamond for most gemstones however believe Cerium oxide to be better with Lightning Ridge or Coober Pedy Opal.

You will need to organise your own gravity fed container and hose that will attach to the back of the manifold.

All customisation and any warranty work is carried out in our own workshop. We have many years of experience in selling and servicing cabbing machines.

Unlike our competition, the staff at Gemcuts include professional commercial cutters and can offer the best advice there is.