Tin Blade 110mm (4.25 Inch) x 0.35mm x 20mm Arbor

LAPIDARY DIAMOND SAW BLADE

THIN KERF 1110mm.(approx 4 inch)  Select your preferred thickness.

The depth of the notches is 1.50 mm. These saw blades are steel core. The strength of steel gives you a thin kerf (thickness of cut) so you don't waste a lot of precious material.

The blades will rust if left standing in water for an extended period of time. If you choose to leave your blades in water over night we recommend adding a rust inhibitor to your water.

We can also supply a saw blade bush to fit 1/2" or 5/8" to fit these blades. Bushing must be specified when you place your order. If we have to send them later a postage and handling charge will apply.

PLEASE NOTE : THESE SAW BLADES ARE NOT ABLE TO BE FITTED TO A TILE CUTTER- the centre is too small.

ADVISE YOUR BUSH SIZE IN THE "CUSTOMER INSTRUCTIONS" BOX AT THE CHECKOUT

If the blade seems to slow down in cutting, you can take an old corundum grinding wheel 100 or 80 grit, slice into this a few times, and you once again have a clean smooth cutting blade. We also stock aluminium oxide dressing sticks for sharpening these blades and also for cleaning our diamond wheels.